What is inductance? Electric inductance is a property of all conductors. A change in the current flowing through the conductor creates (induces) a voltage in that conductor, as well as all nearby conductors. The induced voltage opposes the change in the current that induced the voltage. Inductance is a consequence of two laws of physics. Firstly, a constant current flowing through a conductor creates a constant magnetic field. Secondly, a variable magnetic field induces a voltage in all nearby conductors, including the conductor which was used to create the magnetic field in the first place. When these two laws are combined, the resulting effect is inductance. Just like resistors are used to introduce a desired resistance in a circuit, and like capacitors are used to introduce a desired capacitance, inductors are electrical elements used to introduce a desired amount of inductance into the circuit. The inductance formula for an ideal solenoid (a coil of wire) wound around a cylindrical body of material is given as:     where L is the inductance, µ is the magnetic permeability of the material used in the inductor, A is the cross-sectional area of the coil and l is the length of the solenoid (not the length of the wire, but the longitudinal dimension of the coil). An ideal capacitor has no resistance and no inductance, but has a defined and constant value of capacitance. The unit used to represent inductance is henry, named after Joseph Henry, an American scientist who discovered inductance. Parasitic inductance Parasitic inductance is an unwanted inductance effect that is unavoidably present in all real electronic devices. As opposed to deliberate inductance, which is introduced into the circuit by the use of an inductor, parasitic inductance is almost always an undesired effect. There are few applications in which parasitic inductance is [… read more]

What are polymer capacitors? Polymer capacitors are capacitors which use conductive polymers as the electrolyte. They use solid polymer electrolytes instead of liquid or gel electrolytes that are found in ordinary electrolytic capacitors. By using solid electrolyte, the electrolyte drying is completely avoided. Electrolyte drying is one the factors that limit the lifetime of ordinary electrolytic capacitors. There are several types of polymer capacitors, including aluminium polymer capacitors, polymerized organic semiconductors and conductive polymer capacitors. In most cases, polymer capacitors can be used as direct replacements for electrolytic capacitors, as long as the maximum rated voltage is not exceeded. The maximum rated voltage of solid polymer capacitors is lower than the maximum voltage of classical electrolytic capacitors: usually up to 35 volts, although some polymer capacitors are made with maximum operating voltages of up to 100 volts DC. Polymer capacitors have a number of qualities superior to ordinary electrolyte capacitors: longer lifetime, higher maximum working temperature, better stability, lower equivalent series resistance (ESR) and a much safer failure mode. These qualities come at a price of lower maximum voltage rating and a narrower capacitance range, as well as a higher cost compared to wet electrolyte capacitors. This type of capacitor is not that new: production started in the 1980s and since then, they have been used in many applications including server motherboards and computer graphic accelerator cards. Polymer capacitor definition A polymer capacitor is a capacitor which uses solid polymers as the electrolyte. They have a number of superior qualities including a safer failure mode, lower losses and a longer lifetime than electrolytic capacitors. Characteristics Equivalent series resistance Compared to ordinary electrolytic capacitors, polymer capacitors have a lower equivalent series resistance. This allows polymer capacitors to withstand higher ripple currents during normal operation. A ripple current is the AC component [… read more]